IP Network
This is a security signaling platform that has been designed specifically to provide an IP solution for secure monitoring. This has been designed to replace the traditional PSTN phone line that is usually required for dual path signaling. It is dual path by using both wireless technology and the on-site broadband connection. With these combinations in place, IP is fast becoming the chosen solution for many sites and particularly when upgrades are recommended.
Telephone Line
This is an established but basic solution it remains reliable and low cost. It uses just a single path via a telephone line. As a line fault means there is no communication capability a test signal is sent at least every 24 hours to monitor the line. The CMS will notify the customer in the event a test signal is not received.
GSM
GSM path to communicate to a control monitoring station (CMS). Signaling paths is constantly polled to verify the communication link is working. The CMS will therefore know straight away if there is any line fault or failure.
IP + Telephone line + GSM
This is also a dual path signaling device that works on any standard telephone line. It comes as high security level of alarm signal back up system. – the difference being the polling frequency. Is an intruder alarm signaling device that uses the mobile network and your telephone and/or IP path to transmit intruder, fire and personal attack signals at high speed.
